Support for Apps and Accessories
Helpful hints and guides to make the most out of our Apps and Accessories.
How to handle StreamLine Mic
How to handle Made for iPhone hearing aids
How to handle your TV Transmitter
The easyTek in detail
(1) Multi-function button
(2) Neckloop antenna
(3) Microphone openings
(4) Status information with LED indicators
(5) Neckloop ports
(6) Volume buttons
(7) Port for audio devices with 3.5 mm jack
(8) Port for FM receiver
(9) Reset button
(10) Micro-USB port for charging
Hearing aids: Step 1
Put easyTek around your customer’s neck. Turn easyTek on by pressing the multi-function button (1) until the green LED (4) turns on.
Hearing aids: Step 2
Put the hearing aids into the ears and turn them on. The green LED (4) flashes briefly and then slowly fades. Now the hearing aids and the easyTek are paired.
Bluetooth-enabled devices: Step 1
Turn easyTek on by pressing and holding the multi-function button (1) for several seconds. If the blue LED (4) does not automatically start flashing, press the multi function button (1) and volume up button (6) simultaneously until it does.
Bluetooth-enabled devices: Step 2
Turn on the device’s Bluetooth function. Search for easyTek and select it. The blue LED (4) flashes briefly and then slowly fades.
TV Transmitter: Step 1
Turn the easyTek on by pressing and holding the multi-function button (1) for several seconds. Press (1) and both volume buttons (6) simultaneously until the blue LED (4) flashes.
TV Transmitter: Step 2
Turn the TV transmitter on within 1m of easyTek and wait for the pairing to complete. This takes approximately 2 minutes. The blue LED (4) will stop flashing and remain on.
How to handle easyTek
How to handle the easyTek App
How to handle the touchControl App
miniPocket in detail
(2) LED signal indicator
(3) Volume buttons
(4) Key lock
(5) Program change button
(6) On rear side: Battery compartment
(7) On rear side: Opening for key ring